loader

Ignition Coils

Ignition Coil-on-Plug (COP)

The ignition coil converts a low voltage current to high voltage energy that is delivered to the spark plug to ignite the air/fuel mixture within the cylinder. A coil-on-plug is designed to perform the functions of both the ignition coil which creates the spark energy, and the spark plug wire set that is designed to contain and deliver the high voltage energy to the spark plug. Intermotor® Coil-on-Plug assemblies are engineered and tested to meet or exceed OE standards for spark energy, impedance, and durability.

Designed to take the heat

Manufactured in Intermotor’s TS16949 certified, Bialystok, Poland facility, our specially formulated epoxy is high temperature shock-resistant to handle rapid changes in engine temperature and prevent cracking or coil damage. Engineered to bond with the coil housing and bobbins, our unique process eliminates air pockets and prevents moisture intrusion and thermal breakdown. It’s just one more design detail that makes us the import leader by design.

  • coil-cad_1png

    Tin-plated brass terminals for corrosion protection and improved electrical contact

  • coil-cad_2png

    Samarium-cobalt magnet in the core creates a strong magnetic field for maximum high voltage output at all speeds

  • coil-cad_3png

    Primary coil winding made of 200°C/392°F insulated premium 25-gauge copper wire - engineered and precision wound to generate a strong magnetic field for improved performance

  • coil-cad_4png

    Improved secondary windings using ETP copper wire provides maximum voltage conductivity

  • coil-cad_5png

    Reinforced bobbins and additional winding bays prevent internal arcing, high voltage breakdown, and voltage flashover

  • coil-cad_6png

    Exact-match electronic module feedback signal

  • coil-cad_7png

    Bobbin is made from polyphenylene oxide glass material to prevent voltage leaking between the primary and secondary coils

  • coil-cad_8png

    Secondary coil windings are precision wound and trimmed to produce desired output voltage

  • coil-cad_9png

    Housing constructed from high dielectric and impact resistant material that ensures long life in operating conditions

  • coil-cad_10png

    Stainless Steel Spring to resist corrosion

  • coil-cad_11png

    High-temp silicone boot stays flexible for easy removal during related component servicing

Coil-on-Plug Breakdown

Pencil Coils

As engine technology evolves, coil-on-plug technology will continue to play an increasingly important part of ignition systems. One such technology is the pencil coil. Standard® and Intermotor® are leading the way with quality parts and exceptional coverage for this growing category. Take our UF242 Ignition Coil for example:

Tech Tip: If there’s been a failure such as a short, we recommend replacing the spark plug while you’re replacing the pencil coil.

  • pencil-coils-1png

    Silicone rubber boot withstands extreme heat and provides superior insulation

  • pencil-coils-2png

    Stainless steel spring resists corrosion

  • pencil-coils-3png

    Primary and secondary bobbins made from fiberglass-reinforced polyethylene terephthalate prevent voltage flashover for extended service life

  • pencil-coils-4png

    Internal core made from grainoriented electrical steel limits loss factor within magnetic circuit to reduce heat that may affect coil endurance

  • pencil-coils-5png

    External core made from oriented silicon steel for durability

  • pencil-coils-6png

    Neodymium magnet produces max high voltage output at all speeds

  • pencil-coils-7png

    Electronic ignition module profile and feedback signal matches fit, form, and function of original

  • pencil-coils-8png

    Tin-plated brass terminals improve electrical contact and protect against corrosion